Note:
The product should be fully charged before Using，for safe transportation, the built-in battery has low power and cannot be welded firmly
If you have no 5V Power adapter,we suggest you can choice the Spot welder with 18W power adapter together,if you not have a power adapter 5V above 2A current,can not charge for the high discharge Lipo battery inside the spot welder!
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
DH30 V8 Spot Welder
Material: Metal Case
Screen: 1.8 Inch LCD Screen
Battery Capacity: 5000mAh
Voltage: 4.2±0.05V
Welding Current: 6-800A
USB Output: 5V 2.4A MAX
Charging Port: Type-C
Battery life: 800-2000 times
Battery Working cycle life: 1000 cycles
Standby Current: 20uA
Size: About 112x80x30mm/4.41x3.15x1.18in
Weight:Welder host abot 350g,Welder pen abot 80g,accessories and packaging about 70g,total about 500g
Gears: Thousands of combined gears can be combined (1000 gears +)
DH30 V8 Packaging Include
1 x DH30 V8 Host
2 x Welding Pen
1 x Type C Charging Cable
Several Nickel plated nickel sheet
1 x EU Power Adapter (Optional)
1 x Storage Bag (Optional)
How to Charging
Type C to type C connect will have some charging problem!
We suggest directly connect the charging wire come with spot welder from power adapter to spot welder，and power adapter need 5V current above 2A.
We not suggest use PD charger or connect any other voltage current meter,because some PD charger and wire can not output a 5V voltage.
Spot Welder include high discharge lipo battery,for safe delivery,it have low power,inside IC control charging current when battery is low power,
In the case of low power, there may be a low voltage alarm or the screen is not bright, continue to charge, the screen will return to normal，we suggest charing more than 30 minutes.
How to Welding
Long click the white button to power on or off the spot welder.
Try different spot welding power from low to high,we suggest use Main Pulse 10 to welding 0.12mm Nickel steel strip.
For detailed welding parameter settings, please refer to the chart below
When welding, press down the soldering pin lightly, and the nickel sheet and the battery can be bonded together. The harder you press, the less solid the welding will be. It will automatically trigger after pressing down for one second.
Precautions for maintenance
The spot-welding machine has a built-in high-rate lithium battery, which is different from the mobile phone battery. The high-rate lithium battery can discharge with high current, so if it is not used for a long time, it may cause the battery voltage too low to shut down, and serious may cause battery damage. We recommend charging it to about 80% for storage in 2-3 months
